All posts

HVAC takeoff software from drawings: which kind you need, and where the duct sizes come from

HVAC takeoff software from drawings: which kind you need, and where the duct sizes come from

Estimating takeoff, load takeoff, or design-led quantities? What each kind of HVAC takeoff software reads from a drawing, and where the duct sizes come from.

"HVAC takeoff software" means three different things depending on who's asking. An estimator wants quantities off an issued mechanical set. An engineer wants rooms, areas, and walls off the architectural plans so they can run loads. A design-build contractor bidding from a set with no duct sizes needs both: size the system first, then count it. Pick the wrong kind and you'll spend a week fighting the tool.

The short answer

HVAC takeoff software reads a drawing and turns it into a list. Estimating takeoff tools (FastDUCT, QuoteSoft, Trimble AutoBid SheetMetal, Vertigraph BidScreen XL, and AI tools like DuctIQ and Beam AI) measure ducts, fittings, and equipment shown on a mechanical set and price them. Load takeoff tools (HVAKR, AutoHVAC for residential) read architectural floor plans into rooms and envelope so you can calculate heating and cooling loads. Design-led tools (h2x, HVAKR, Trane VariTrane Duct Designer, Elite Ductsize) size the ducts from airflow first, then list the materials. If the drawings already show duct sizes, use an estimating tool. If they don't, the sizes have to come from a calculation.

Three kinds of takeoff

KindReadsProducesWhere duct sizes come fromExamples
Estimating takeoffMechanical plans, schedules, specsDuct by size and gauge, pounds of sheet metal, fittings, equipment, labor, a priced bidWhatever the drawings show, or the estimator entersFastDUCT, QuoteSoft, Trimble AutoBid SheetMetal, Vertigraph BidScreen XL; AI: DuctIQ, Beam AI
Load takeoffArchitectural floor plansSpaces with areas, boundaries, walls, windows, ready for load calcsNot part of this stepHVAKR (commercial), AutoHVAC (residential Manual J), LoadLens (simplified)
Design-led quantitiesYour design modelSized ducts and a material list from the designCalculated from airflow against velocity and pressure-drop limitsh2x, HVAKR, Trane VariTrane Duct Designer, Elite Ductsize

Estimating takeoff: counting what's drawn

This is what most estimators mean. You load the mechanical PDFs, set the scale, and trace or click each run. The software turns rectangular duct into pounds by size and gauge, adds fittings, hangers, liner, and labor, and spits out a bid.

  • FastDUCT (FastEST, Inc.): on-screen takeoff for rectangular, round, and oval duct on PDF plans, a catalog of 250,000+ items with SMACNA labor rates, and a one-click report of pounds, square feet, material, and shop and field labor. Exports to Excel. (fastest-inc.com)
  • QuoteSoft Duct: spec-driven duct takeoff on PDF and CAD plans that calculates metal pounds, square feet, liner, equipment cost, and shop and field labor as you go, and lets you change gauge, joint, seam, and hanger during takeoff. (quotesoft.com)
  • Trimble AutoBid SheetMetal: specification-driven sheet metal takeoff with a pre-built database of rectangular, round, and oval duct and equipment, built-in SMACNA labor units, and Excel-based bid reports. (trimble.com)
  • Vertigraph BidScreen XL: general counts, lengths, and areas from PDF or CAD written into your Excel workbook; not HVAC-specific. (vertigraph.com)
  • DuctIQ: upload a mechanical PDF and its AI reads duct sizes, traces runs, counts fittings, and reads equipment tags, then exports to Excel. Plans from $29.99/month (residential) to $99.99/month (industrial). It says results must be reviewed and verified by your estimating team before use in any bid. (ductiq.ca)
  • Beam AI: done-for-you AI takeoffs across trades, including HVAC, returned in 24 to 72 hours, or software to run your own. Its pricing page lists annual licenses from $8K per trade (do it yourself) and from $25K (done for you). (ibeam.ai)

All of these count what's on the sheet. None of them checks whether the duct on the sheet is the right size. That's fine on a hard-bid job with a stamped set. It's a problem on design-build work, where the set shows routes and diffusers but no sizes. For the basics of turning quantities into a bid, see A comprehensive guide to HVAC estimating.

Load takeoff: rooms, not ducts

Before an engineer can size anything, they need the building in the load program: every room, its area, its exterior walls and windows, its use. Typing that in from the architect's PDF is the slowest part of a commercial load calc.

Load takeoff tools read the floor plan and propose spaces. HVAKR's Auto Takeoff reads each level of a PDF set, proposes a space for each room with its boundary, area, and name, applies the wall, window, roof, and slab types you pick, and waits for you to include or exclude each one. It uses no AI credits. AutoHVAC does the same job for residential plans and runs ACCA Manual J. We cover this in depth in HVAC load calculations from PDF floor plans.

Design-led quantities: size it, then count it

On design-build and negotiated work, the contractor often owns the sizing. The order of work is:

  1. Take off the spaces from the architectural plans.
  2. Calculate loads per space and set supply airflow from the sensible load (see CFM from cooling load).
  3. Place the units and registers, route the ducts, and size each duct to your velocity and pressure-drop limits (see Understanding duct sizing, or size a run by hand with the free ductulator).
  4. Read the critical path and external static pressure, and check the fan.
  5. Pull the quantities: duct length and weight by size, fittings, registers by type, and equipment.
  6. Price it in your estimating tool or a spreadsheet.

Steps 2 to 4 are engineering. On design-build work they still need review by the engineer responsible for the design, even when the contractor owns the sizing.

When the architect revises the plan, you change the model, the loads and sizes update, and you pull the list again, instead of re-tracing a new set.

In HVAKR, steps 1 to 5 happen in one project. The Schedules view (beta) lists each duct type and size with length, fitting count, and sheet-metal weight, groups identical registers with a quantity, and lists central and terminal units with their airflows and capacities. Turn on Costs and duct cost is weight times the cost per pound you set on each duct type; you enter unit costs for equipment and registers. Fittings are counted but not priced. Every schedule downloads as CSV. h2x builds a pricing-ready bill of materials from its design, with pricing you can edit per component, and Trane VariTrane Duct Designer and Elite Ductsize both print a bill of materials from their duct models.

What HVAKR doesn't do: read duct sizes off someone else's mechanical drawings, price labor, or replace your estimating database. If you're bidding a stamped mechanical set, use an estimating tool.

Duct weight, by hand

Every tool above turns rectangular duct into pounds the same basic way: perimeter times length times the weight of the sheet.

Example: 30 ft of 24 × 12 in. galvanized duct at 24 gauge.

  • Perimeter: 2 × (24 + 12) = 72 in. = 6.0 ft
  • Sheet weight, 24 ga galvanized (0.0276 in. nominal): 1.156 lb/ft², the theoretical value in published galvanized gauge tables
  • Weight: 6.0 ft × 30 ft × 1.156 lb/ft² ≈ 208 lb before seams, reinforcement, and waste

Estimators add an allowance on top for seams, joints, and scrap, and the gauge itself depends on duct size and pressure class under SMACNA's HVAC Duct Construction Standards, Metal and Flexible (4th edition, ANSI/SMACNA 006-2020). Check your shop's numbers, not ours.

What to check before you buy

  • What's on your drawings? Sized mechanical set: estimating tool. Architectural plans only: you need design first.
  • Vector or scanned PDFs. DuctIQ, for one, says vector PDFs read best and scans get more rows flagged for review. HVAKR's takeoff docs ask for clear, high-resolution drawings with legible room labels.
  • Revisions. Ask what happens when sheet M-201 rev C replaces rev B. Re-trace, compare, or update the model?
  • Who checks the AI. DuctIQ and HVAKR both tell you to review AI results before you use them, and Beam AI QA-checks its done-for-you takeoffs. Budget the review time either way.
  • Export. CSV or Excel you can drop into your pricing workbook, without retyping.

FAQ

What is HVAC takeoff software?

HVAC takeoff software reads construction drawings and produces a quantity list. Estimating takeoff tools measure ducts, pipes, fittings, and equipment from mechanical plans and price them. Load takeoff tools read architectural floor plans into rooms and envelope for heating and cooling load calculations.

Can AI do an HVAC takeoff from a PDF?

Yes, with review. DuctIQ and Beam AI extract duct lengths, fittings, and equipment from mechanical PDFs for estimating. HVAKR and AutoHVAC read architectural floor plans into rooms for load calculations. Check the results before you rely on them (DuctIQ and HVAKR both say so), and expect clean vector PDFs to read better than scans.

What's the difference between an HVAC takeoff and a load calculation?

A takeoff measures what's on the drawings. A load calculation works out how much heating and cooling each space needs, which then sets airflow and duct sizes. On design-build jobs the load calc comes first, because the duct sizes you take off should come from it.

How do you calculate the weight of rectangular ductwork?

Multiply the duct perimeter in feet by its length in feet and by the sheet weight in pounds per square foot for the gauge. For example, 30 ft of 24 × 12 in. duct at 24 gauge is about 6 ft × 30 ft × 1.156 lb/ft², or roughly 208 lb, before seam and waste allowances.

Does HVAKR do HVAC takeoffs?

HVAKR takes off spaces from architectural PDF floor plans for load calculations, and its Schedules view (beta) lists duct length, sheet-metal weight, fittings, registers, and equipment from the duct system you design in HVAKR, with CSV export. It doesn't read duct sizes from someone else's mechanical drawings or price labor.

If you're taking off spaces from architectural plans and sizing the system before you count it, that workflow lives in HVAKR. Auto Takeoff is included and uses no credits. See pricing, or start with the free ductulator. For how AI fits into design, not just takeoff, see AI HVAC design software.

Sources (checked November 12, 2026)

Share this post