How to get a Revit model into HAP, TRACE, IES VE or Chvac by gbXML, what the file actually carries, how to check it before import, and when to skip gbXML.
gbXML is the file most mechanical engineers use to move a Revit model into a load program. It carries the building's geometry well: spaces, surfaces and openings. It usually doesn't carry the things that make a load calc right, such as U-values, schedules, internal gains and outdoor air. Treat a gbXML import as a geometry takeoff that saves you drawing rooms, then check it and fill in the rest in the load program.
The short answer
Export gbXML from Revit with the space-based option your load program expects, check the file before you import it, and plan to enter constructions, schedules, people, lighting, equipment and ventilation in the load program. Carrier HAP v6.2+, Trane TRACE 3D Plus and TRACE 700, IES VE, and Elite Chvac all import gbXML. If the architectural model isn't space-bounded, a gbXML export will cost you more time than it saves; take off spaces from the PDF sheets instead.
What gbXML is
gbXML (Green Building XML) is an open XML schema for exchanging building data between BIM and analysis software. The schema is maintained at gbxml.org, where the current version is 8.01. Revit 2026 exports to schema version 7.03.
Revit builds the gbXML from its energy analytical model. Its export options follow the analysis mode in Energy Settings:
- Use building elements: analytical spaces and surfaces from walls, floors, roofs and so on.
- Use rooms/spaces elements: analytical spaces and surfaces from room or space volumes.
- Use conceptual masses and building elements: for early massing studies.
Most load programs want the rooms/spaces option, because each space in the file then maps to a room you'll calculate.
What comes across, and what usually doesn't
| Usually comes across | Often missing or needs checking |
|---|---|
| Space names, numbers and volumes | Wall, roof and window U-values and SHGC (CAD material definitions rarely include them) |
| Exterior and interior surfaces, with their adjacencies | Occupancy, lighting and equipment schedules |
| Window, door and skylight openings, positioned in the surfaces | People, lighting and equipment densities |
| Levels and orientation | Outdoor air rates and 62.1 space types |
| Building type and location, if set before export | HVAC systems and zoning |
That split isn't a rule of the schema; gbXML can hold constructions and schedules. It's what happens in practice with files exported from Revit. Carrier's HAP v6.2 notes describe the import as geometry: levels, spaces, surfaces and positioned openings, so plan to review and enter constructions, schedules and internal loads in HAP. Elite's Chvac page says the same thing from the vendor side: CAD gbXML files usually have incomplete material definitions, so its import dialog lets you pick default constructions.
Which load programs import gbXML
If you're weighing the programs themselves, we compare HVAKR with Carrier HAP, Trane TRACE, IES VE and Elite Chvac separately.
| Program | gbXML import | Results back to Revit | Notes (checked Nov 17, 2026) |
|---|---|---|---|
| Carrier HAP v6.2+ | Yes: Project > Import gbXML builds a 3D building model | Not listed in Carrier's v6.2 import notes | Carrier requires closed volumes for every space; review and correct after import |
| Trane TRACE 3D Plus | Yes, Space export from Revit | Yes, from v7.0: room cooling and heating loads and airflow | The export adds only room cooling and heating max loads and the larger airflow. One final major release (v8) planned |
| Trane TRACE 700 | Yes (TRACE 700 Learning Series, Module 6) | Module 6 covers gbXML export; it doesn't say loads are included | Still sold; Trane provides no official technical support for it |
| IES VE | Yes: gbXML, veXML or IFC through the BIM Navigator, which also heals gaps | gbXML export can include ASHRAE or CIBSE heating and cooling loads | Also offers IES Sync for Revit |
| Elite Chvac | Yes, with control over which spaces, walls and windows to include | Exports gbXML; Elite doesn't say whether loads are included | You assign default constructions on import |
| OpenStudio / EnergyPlus | Yes, the OpenStudio Application imports gbXML; Pollination's Revit plug-in also exports HBJSON, OSM and gbXML | No | Energy modeling route, not a design-load report |
| HVAKR | No. Starts from PDF floor plans, or from MEP spaces the free Revit add-in round-trips between Revit and HVAKR | MEP spaces through the add-in; design airflows by CSV export | gbXML export (Team and Enterprise) carries geometry and constructions, not loads or airflows |
In plain text: HAP v6.2+, TRACE 3D Plus, TRACE 700, IES VE and Elite Chvac import gbXML. TRACE 3D Plus (v7.0+) and IES VE can send loads back out by gbXML. HVAKR doesn't import gbXML; it works from PDF floor plans or MEP spaces brought over by its Revit add-in, and exports gbXML without loads.
Export from Revit: the steps
- Place a space in every room you'll calculate, including plenums and shafts if your load program models them. Give spaces the same names and numbers as the architectural room tags so results map back.
- Check room-bounding on walls, floors, roofs and ceilings, and set each space's upper limit so the volume closes.
- Set the building type and location in Energy Settings before export.
- Pick the export option your load program expects (rooms/spaces for most).
- Export, then open the file in a viewer before you import it anywhere.
Check the file before you import it
Ten minutes here saves a day of chasing loads later.
- Count spaces. The gbXML space count should match the Revit space schedule. Missing spaces mean unbounded rooms.
- Compare floor areas. Total area in the file against the architect's area schedule, floor by floor. A big gap usually means missing spaces or overlapping volumes.
- Look at exterior walls by orientation. Glazing in the wrong facade or a wall typed as interior changes the solar load.
- Check adjacencies. Surfaces between two conditioned spaces should be interior, not exterior. Slabs on grade and roofs should be typed as such.
- Watch for fragments. Curtain walls and window grids can split one wall into many small surfaces. Check your load program's documentation for limits on surfaces per space.
Getting results back into Revit
gbXML is mostly a one-way trip for design loads. A few programs send results back:
- TRACE 3D Plus (v7.0+) exports room cooling load, room heating load and the larger of the cooling or heating airflow to Revit by gbXML.
- IES VE can include ASHRAE or CIBSE heating and cooling loads in its gbXML export.
- Everyone else: enter design airflows on Revit spaces from the load report or a CSV export. HVAKR exports a Ventilation and Airflow CSV and a Loads Report CSV for this.
Whichever route you use, keep one source of truth. If loads live in the load program, treat the values in Revit as dated copies.
When to skip gbXML
- The architectural model isn't space-bounded, or it's built for drawings, not analysis. Fixing it is the architect's model, and every fix gets overwritten by the next revision.
- You're in schematic design and the plans change weekly. Each revision means export, re-import, re-check and re-enter.
- You only have PDFs. Plenty of projects reach MEP as a PDF set, or the Revit model lags the drawings.
In those cases, take off spaces from the sheets. HVAKR's AI Space Takeoff proposes spaces from the floor plans you place on each level, and you review them one level at a time before they're added (how it works from PDF floor plans). When a Revit model is ready, HVAKR's free add-in for Revit 2025 and 2026 round-trips MEP spaces between Revit and HVAKR, so you don't re-key the model. For the full picture of Revit's own load tools and add-ins, see our guide to Revit HVAC load calculation.
FAQ
What is gbXML used for in HVAC design?
gbXML is an open file format for moving building geometry and related data from a BIM tool like Revit into energy and load calculation software. In HVAC design it's mostly used to bring spaces, surfaces and window openings into a load program such as Carrier HAP, Trane TRACE 3D Plus, IES VE or Elite Chvac, so the engineer doesn't redraw every room.
Does a Revit gbXML export include U-values and loads?
Usually not in a form a load program can use. Revit exports geometry from its energy analytical model, but Carrier describes its HAP gbXML import as geometry, and Elite notes that CAD gbXML files usually lack load-calculation data such as wall U-values. Plan to assign constructions and internal loads in the load program after import.
Which HVAC load software can import gbXML?
Carrier HAP v6.2 and later, Trane TRACE 3D Plus and TRACE 700, IES VE (through its BIM Navigator), and Elite Chvac all import gbXML. OpenStudio and EnergyPlus workflows can also start from a Revit export. HVAKR doesn't import gbXML; it starts from PDF floor plans or from MEP spaces brought over by its free Revit add-in.
How do I export Revit to HVAC load software?
Place and bound a space in every room, set the building type and location in Energy Settings, and export gbXML with the rooms/spaces option (TRACE 3D Plus asks for the Space export). Check the file's space count, floor areas and exterior surfaces before importing it into the load program, then assign constructions, schedules and ventilation there.
Can I get HVAC loads back into Revit from gbXML?
Some programs support it. Trane TRACE 3D Plus (version 7.0 and later) exports room cooling and heating loads and airflow back to Revit by gbXML, and IES VE can include ASHRAE or CIBSE loads in its gbXML export. Otherwise, enter design airflows on Revit spaces from the load report or a CSV export.
Does HVAKR's gbXML export include loads?
No. HVAKR's gbXML export, available on Team and Enterprise plans, is a geometry and construction export. It doesn't include calculated loads or airflows; use HVAKR's Loads Report CSV and Ventilation and Airflow CSV exports for those.
Sources (checked Nov 17 and Nov 19, 2026)
- gbXML schema: gbxml.org (current version 8.01)
- Revit: Exporting to gbXML (Revit 2026 help; options; schema 7.03)
- Carrier HAP: HAP v6.2 features, "gbXML Import" (PDF); Carrier University SSN-V 006 course (gbXML import)
- Trane: TRACE 3D Plus gbXML export help, gbXML Export in TRACE 3D Plus (KB), TRACE 700 Learning Series Module 6 (PDF), Software Support Lifecycle, TRACE 700 FAQ (Mar 9, 2026)
- IES VE: BIM Navigator
- Elite Chvac: elitesoft.com/web/hvacr/chvacx.html
- OpenStudio: OpenStudio Application source (gbXML import)
- Pollination: pollination.solutions/revit-plugin
- HVAKR: Reports and exports (gbXML on Team and Enterprise, CSV), AI Space Takeoff, Revit add-in repo



