All posts

HVAC load calculations from PDF floor plans: what the software reads and what you still decide

HVAC load calculations from PDF floor plans: what the software reads and what you still decide

How to run a commercial HVAC load calculation from PDF floor plans: what the drawing gives you, what the engineer sets, and what to check.

TL;DR

You can run a commercial HVAC load calculation straight from the architect's PDF floor plans. The software reads what's on the sheet: room boundaries, room names, areas, scale, sheet numbers, and sometimes levels and ceiling heights. The engineer still sets what the drawing doesn't say: envelope assemblies, space types and occupancy, indoor conditions, schedules, and the ASHRAE 62.1 outdoor air basis. Residential tools (AutoHVAC, Cool Calc) do this for Manual J; for commercial buildings, HVAKR reads multi-page PDF or DXF sets, proposes spaces per level for the engineer to approve, and runs ASHRAE RTS loads under ANSI/ASHRAE/ACCA Standard 183.

What a load calc needs from the drawings

A load model needs four kinds of information from the plans. Know which ones the drawing actually contains before you trust any automated takeoff.

InputUsually on a floor plan PDF?Where it comes from if not
Space boundaries, names, areasYesRoom schedule or finish plan
Scale, levels, floor-to-floor and ceiling heightsScale yes; heights sometimesSections, reflected ceiling plans, title block
Exterior walls and windows by orientationWalls yes; window sizes partlyElevations, window schedule, north arrow
Assemblies (U-factor, SHGC, absorptance)RarelyWall sections, specs, energy code compliance forms
Occupancy, lighting, equipment, schedulesNoSpace type (ASHRAE 62.1 category, ASHRAE 90.1 tables), owner's program
Design conditionsNoProject address and climatic design data

In plain text: a floor plan PDF usually gives you space boundaries, names, areas, scale, and exterior walls. It sometimes gives heights and window sizes, rarely gives assemblies, and never gives occupancy, schedules, or design conditions.

So "load calc from a PDF" really means "geometry from a PDF, judgment from the engineer." Tools that skip the second half are guessing.

How HVAKR runs it from a PDF set

  1. Upload the set. HVAKR takes PDF and DXF only. Multi-page PDF is preferred; DXF is converted to vector PDF on upload. There's no DWG or IFC import, so save DWG files out as PDF or DXF first. Each page becomes a sheet.[1]
  2. Check what HVAKR read. HVAKR classifies each sheet type and reads the sheet number, scale, default slab-to-slab and ceiling heights, and level from plan pages, keeping a reading only when it's confident. A scale that isn't a standard architectural scale is flagged for you to confirm. Calibrate the scale by measuring a known distance if needed.[1]
  3. Set the basis of design. The project address picks the weather station and climate zone (ASHRAE 2025 by default for new projects; 0.4% monthly cooling and 99.6% heating percentiles by default). Pick or import envelope types and space types.[2]
  4. Run Auto Takeoff Spaces. HVAKR AI reads room boundaries and labels on each level, creates a polygon per space with its area and name, and applies the wall, window, roof, and slab types you chose. Windows are detected only if you pick a window type.[3]
  5. Review level by level. Every generated space is marked Included or Excluded. Toggle, approve, or cancel each level, then fix boundaries, names, and space types with the normal editing tools. Nothing goes into the model until you approve it.[3]
  6. Calculate. Cooling uses the ASHRAE Radiant Time Series method across a 24-hour profile for every month (288 month-hour points, peak taken from the largest); heating is steady-state with no solar credit; outdoor air follows the ASHRAE 62.1 Ventilation Rate Procedure by space type.[4]
  7. Revise when the architect does. Upload the new revision; it becomes the current version for that sheet number, and older versions stay available. Check that spaces still line up, and adjust boundaries if the drawing changed a lot.[1]

What to check before you trust the numbers

  • Scale. One wrong scale throws off every area and wall length. Check one known dimension per sheet.
  • Missed and merged spaces. Unusual shapes, open offices, and corridors get missed or merged. HVAKR's docs say plainly that AI may miss unusual shapes; draw those by hand.[3]
  • Exterior exposure. Confirm which walls are exterior and which way they face. Orientation drives solar gain.
  • Setpoints. HVAKR ships no default indoor setpoints; a space type without them zeros the related loads.[4] See Missing or Zero Loads.
  • Plenums and ceilings. Ceiling heights read from plans may not match the reflected ceiling plan. Check whether roof, wall, and lighting loads go to the space or the plenum. HVAKR reports Roof to Plenum and Wall to Plenum separately when those options are on, and lets you assign a share of lighting heat to the ceiling plenum.[5]
  • Drawing quality. HVAKR's takeoff works best with clear, high-resolution sheets, visible room boundaries, legible labels, and standard architectural conventions. If a poor scan comes back with missed rooms, draw them by hand or ask the architect for the original PDF.[3]

Tools that start from a floor plan (as of October 28, 2026)

HVAKRAutoHVACCool CalcLoadLens
Building typeCommercialResidentialResidentialSimplified cooling estimates, for study and checking
Method (per vendor)ASHRAE RTS under ANSI/ASHRAE/ACCA 183; ASHRAE 62.1 VRPACCA Manual J 8th Ed. and Manual S equipment sizing, per AutoHVAC; not on ACCA's approved software list on Oct 28, 2026ACCA Manual J, S, DSimplified ASHRAE/Carrier E-20 style (ETD/CLTD); not hourly RTS
InputMulti-page PDF or DXF only (no DWG or IFC); AI proposes spaces per levelPDF plan sets ("CAD exports or clean scans")Floor-plan upload, LiDAR scan, satellite trace, free-drawText-layer PDF or room schedule (CSV/XLSX); optional OCR
Review stepEngineer includes or excludes each space per level, then editsAnswer six questions the plans may not answer; each assumption is tagged with its sourceGuided project entryEditable room table
Vendor's own caveatAI may miss unusual shapes; review carefullySelf-graded 0–100 "HVAC IQ Score"; under 70 is marked "Needs Attention"Manual J applies to homes of three stories or less"Every result must be checked by a qualified HVAC engineer"; no duct heat gain, fan heat, diversity, or local code

Sources: HVAKR docs; autohvac.ai; coolcalc.com and Cool Calc support; loadlens.net. Checked Oct 28, 2026. ACCA's list: acca.org.

In plain text: HVAKR is the commercial option here, using ASHRAE RTS under Standard 183 with 62.1 outdoor air, and the engineer approves each space it takes off. AutoHVAC and Cool Calc do residential Manual J. LoadLens is a simplified estimator that tells you a qualified engineer must check every result.

Pick by building type. For houses, a residential tool that produces an ACCA-listed Manual J is what the permit office wants. For a quick first-pass tonnage on a tender, a simplified estimator can be enough if you treat it as a check. For commercial design you'll submit, use a tool that documents an ASHRAE method under Standard 183 and lets you review every space it took off.

FAQ

Can you do an HVAC load calculation from a PDF floor plan?

Yes. Software can read room boundaries, names, areas, and scale from a PDF floor plan and build the load model from them. The engineer still has to set envelope assemblies, space types and occupancy, indoor conditions, and outdoor air, because a floor plan doesn't contain them.

How does AI takeoff work for HVAC load calculations?

AI takeoff uses computer vision and text reading to find room boundaries and labels on each drawing, then creates a space with a polygon, area, and name for each room. In HVAKR, every generated space is reviewed and approved by the engineer, level by level, before it drives a calculation.

Is a load calculation from a PDF accurate?

It's as accurate as the inputs. Geometry from a correctly scaled vector PDF is reliable, but the result still depends on the assemblies, space types, schedules, design conditions, and outdoor air the engineer sets, and on checking for missed or merged spaces.

What file types work best?

Multi-page PDFs exported straight from CAD or Revit are the cleanest input, because the lines and text come through exactly. HVAKR accepts PDF and DXF only (DXF is converted to vector PDF on upload); it doesn't import DWG or IFC, so export those to PDF or DXF first. Clear, high-resolution scans can work, but a poor scan may need some spaces drawn by hand.

Is there software that does commercial load calculations from floor plans?

Yes. HVAKR takes multi-page PDF or DXF floor plans, proposes spaces per level for the engineer to approve, and calculates cooling loads with the ASHRAE Radiant Time Series method under ANSI/ASHRAE/ACCA Standard 183, with ASHRAE 62.1 outdoor air by space type.


Sources (checked Oct 28, 2026)

Share this post