Commercial duct design and sizing software compared: methods (equal friction, static regain), fittings, critical path, Revit, price, and what each tool skips.
Duct design software sizes a duct system from the airflow each room needs, then tells you the pressure the fan has to overcome. The tools split into three groups: standalone sizing programs (Elite Ductsize, Trane VariTrane Duct Designer, Hands Down HDDuctDesigner), CAD and BIM tools that size inside the model (Revit, MagiCAD), and browser tools where the loads, airflow, and ducts live in one model (HVAKR, h2x, MEPFlow). Which one fits depends on how you size (equal friction or static regain), where your drawings live, and whether you're tired of re-keying airflows from the load program.
The short answer
For static regain on high-velocity VAV systems with a full ASHRAE fitting library, use a dedicated program: Elite Ductsize (Static Regain version) or Trane VariTrane Duct Designer, or Revit's own sizing if you already model there. For sizing inside a Revit model with balancing and sound, MagiCAD. If you want loads, airflow, and duct sizes connected so a design change carries through without re-entry, look at browser tools: HVAKR for commercial HVAC, h2x if you also do plumbing and fire. For a quick check, a free ductulator.
What the software has to do
- Get the airflow right. Each register's CFM should come from the room's load, not a guess (see CFM from cooling load). Tools that hold the load model update this for you; standalone tools need you to type it in.
- Size each section. Equal friction keeps the friction rate roughly constant. Static regain sizes sections so the static pressure regained at each branch offsets the loss downstream, which suits high-velocity VAV mains. Constant velocity caps the velocity.
- Account for fittings. Fitting loss is a loss coefficient times velocity pressure. The ASHRAE Duct Fitting Database publishes loss coefficients for a large set of fittings; simpler tools use one coefficient per fitting type.
- Find the critical path. The run with the highest total pressure drop sets the fan's external static pressure.
- Check limits and document. Velocity for noise, height for the ceiling space, and a schedule or bill of materials someone can build from.
The math in two lines
- Velocity pressure at standard air: Vp = (V / 4005)², with V in fpm and Vp in in. wg. At 1,000 fpm, Vp ≈ 0.062 in. wg.
- Fitting loss: Δp = C × Vp. A fitting with C = 0.30 at 1,000 fpm loses about 0.019 in. wg.
Duct friction itself is typically computed from a friction equation. ASHRAE Handbook—Fundamentals, Chapter 21 (Duct Design), uses the Darcy-Weisbach equation with the Colebrook friction factor. The tools below do the straight-duct math for you; the differences are in the fitting data, the sizing method, and what feeds the airflow.
You can run both lines for a single duct in HVAKR's free online ductulator, which shows fitting loss and duct weight next to the size.
Duct design software compared
| Tool | Type | Sizing methods | Fittings | Loads connected? | Price (checked Nov 13, 2026) |
|---|---|---|---|---|---|
| HVAKR | Browser (and macOS app) | Max velocity and max pressure drop per duct type; round, switches to rectangular at a max height; liner aware | Auto-placed elbows, transitions, wyes; one editable coefficient per type | Yes: loads → airflow → ducts in one model | Solo $240/mo; Team $960/mo for 3 seats |
| h2x | Browser | Max velocity and pressure drop per system; round or rectangular with target aspect ratio | Fittings listed in the bill of materials; fitting-loss data source not published | Yes, plus pipes | Contact sales |
| MEPFlow | Browser | Automatic sizing tied to airflow; method not published | Fittings are part of the pressure-path review; loss data source not published | Yes, plus plumbing and hydronics | $49/mo after 7-day trial (card required) |
| Trane VariTrane Duct Designer | Windows desktop | Equal friction or static regain; auto-balancing | ASHRAE Fitting Database plus United McGill test data; fitting loss calculator | No (supply systems only) | Price not listed; free trial download |
| Elite Ductsize | Windows desktop | Equal friction, constant velocity; static regain and presize in the upgraded version | 190+ ASHRAE fittings; noise calcs | No | $299 equal friction; $499 static regain |
| Hands Down HDDuctDesigner 9.5 | Windows desktop | Equal friction, side by side for round, rectangular, oval | Round and rectangular fitting library; duct weight estimator | No | Price not listed for 9.5 (released summer 2026) |
| Autodesk Revit | BIM (Windows) | Friction, velocity, equal friction, static regain | ASHRAE Duct Fitting Database for equal friction and static regain | Only if you run Revit's loads | Revit subscription |
| MagiCAD | BIM add-in (Revit, AutoCAD, BricsCAD) | Sizing and balancing, including VAV | Localized standards (ASHRAE, CIBSE, DTU); sound calcs | No | Price not listed; contact sales |
| McGill AirFlow Uni-Duct | Design service | Static regain plus total-pressure balancing | Optimizes fittings for cost | No | Design service, free to qualified customers |
| Free ductulators (HVAKR and others) | Web or app | Single duct: size from CFM and friction or velocity | HVAKR's adds a fitting loss (C × Vp) and duct weight line | No | Free |
Residential: Wrightsoft Right-D and other ACCA Manual D tools size residential duct systems. They're built for houses, not commercial systems.
Where each one fits
- HVAKR suits mechanical engineers who want the duct design to stay tied to the loads. Each register's airflow comes from the space's load and air balance. You draw runs on the floor plan (or ask HVAKR AI to route them), run Size Ducts, and HVAKR grows each duct from 6 in. round in 2 in. steps until it meets both the max velocity and the max pressure drop on its duct type, switching to rectangular when it hits your max height. It places elbows, transitions, and wyes itself, and reports the critical path and ESP for every air path, with a CSV export and a 3D view. What it doesn't do: static regain sizing or the full ASHRAE fitting database (it uses one editable coefficient per fitting type). It sizes round and rectangular duct only, and noise is handled through the max-velocity limit rather than acoustic calcs. See the Duct Layout docs.
- h2x sizes ducts and pipes to per-system limits, finds the index run, and gives fan and pump duties, with Revit and AutoCAD exports. Pick it if your team also designs plumbing and fire. See HVAKR vs h2x.
- MEPFlow is a newer, low-cost browser tool with loads, ducts, and plumbing on one $49/month plan.
- Trane VariTrane Duct Designer is the long-standing free-to-try pick for supply-side static regain with tested fitting data and a bill of materials.
- Elite Ductsize is the low-cost, one-time-license workhorse with static regain and noise. See also HVAKR vs Elite Chvac for Elite's load software.
- HDDuctDesigner is a quick equal-friction and fitting-loss calculator, rewritten in 2026, not a system model.
- Revit sizes inside the model you're already documenting in. Results are only as good as the airflow you assign the air terminals.
- MagiCAD is for teams already in Revit, AutoCAD, or BricsCAD that want sizing, balancing, and sound in the model.
How to choose
- VAV with long, high-velocity mains? You want static regain: Ductsize, VariTrane, or Revit.
- Drawings in Revit and staying there? Revit's sizing or MagiCAD.
- Loads in one program, ducts in another, airflows typed in between? That hand-off is where errors creep in. A tool that holds both (HVAKR, h2x, MEPFlow) removes it.
- Need quantities? Check for a schedule or bill of materials: HVAKR (beta schedules with sheet-metal weight), h2x, VariTrane, and Ductsize all produce one.
- Mac users: HVAKR, h2x, and MEPFlow run in a browser. Ductsize, VariTrane, HDDuctDesigner, Revit, and MagiCAD are Windows. HVAKR also has a macOS app.
FAQ
What is the best duct design software for engineers?
It depends on the method and workflow. For static regain with a full ASHRAE fitting library, Elite Ductsize or Trane VariTrane Duct Designer. For sizing inside a BIM model, Revit or MagiCAD. For duct sizing connected to the load calc in one browser model, HVAKR for commercial HVAC or h2x for multi-discipline MEP.
What's the difference between equal friction and static regain?
Equal friction sizes every section for about the same pressure drop per 100 ft of duct. Static regain sizes each section so the static pressure regained as velocity drops at a branch offsets the friction loss to the next branch, keeping static pressure even along the main. Static regain is common on high-velocity VAV systems. For a broader walkthrough of sizing methods, see Understanding duct sizing.
Does Revit size ductwork?
Yes. Revit's Duct Sizing tool sizes by friction, velocity, equal friction, or static regain, and uses the ASHRAE Duct Fitting Database for fitting losses in the equal friction and static regain methods. The airflows come from the air terminals in your model. For running the load calc itself, see Revit HVAC load calculation.
Is there free duct sizing software?
Free ductulators size a single duct from airflow and a friction rate or velocity. HVAKR's free ductulator also shows the fitting loss and the duct's sheet-metal weight. Trane VariTrane Duct Designer offers a free trial download. Full system sizing with fittings and a critical path usually needs a paid tool.
How do you calculate fitting pressure loss?
Multiply the fitting's loss coefficient by the velocity pressure. At standard air, velocity pressure in in. wg is (velocity in fpm ÷ 4005)². For example, a fitting with a coefficient of 0.30 at 1,000 fpm loses about 0.019 in. wg.
If you want duct sizes that stay tied to the loads, try HVAKR. Draw the runs (or ask HVAKR AI to route them), run Size Ducts, and check the critical path. Pricing starts at $240/month for Solo, with a 14-day trial. Size a single duct with the free ductulator. For where the airflows and quantities come from, see HVAC takeoff software. For how AI fits into the same workflow, see AI HVAC design software.
Sources (checked November 13, 2026)
- HVAKR: Duct Layout (sizing, fittings, critical path), System Design and Schedules, System Types, AI Chat, pricing, macOS app, free ductulator
- h2x HVAC design: h2xengineering.com/features/hvac-design/
- MEPFlow: mepflow.ca, pricing, methods and scope
- Trane VariTrane Duct Designer: product page (trial download), Getting Started Guide
- Elite Ductsize: features, price list
- Hands Down HDDuctDesigner 9.5: handsdownsoftware.com
- Revit duct sizing: About Duct Sizing Methods (Revit 2026 help)
- MagiCAD Ventilation: magicad.com, ventilation calculations, supported standards
- McGill AirFlow Uni-Duct: mcgillairflow.com/uniduct
- Wrightsoft Right-D: wrightsoft.com/right-d
- Method references: ASHRAE Handbook—Fundamentals (2021), Chapter 21 Duct Design; SMACNA HVAC Systems Duct Design manual



